Water and wastewater · Pump distributor
Out with the old, in with the new: a station upgraded to Telemetrix
The distributor replaced a tired pump control panel with Telemetrix, so the station the engineer had been called out to now tells him when something is wrong.
- Customer
- Pump distributor
- Panel
- Telemetrix
- Work
- Panel replacement
The challenge
Replace an end-of-life pump control panel with one that does the same job and adds remote monitoring.
What we supplied
A Telemetrix wastewater panel with industrial switchgear and alerts over 4G, WiFi or Ethernet.
The result
The same job done, with the next fault known about before the site rings.
The requirement
Replace a pump control panel that had come to the end of its life with one that does the same job and adds remote monitoring, so the next fault is known about before the site rings.
The constraints
- A straight swap on a working station: in, out and running the same day.
- The engineers who maintain it needed a panel they could learn once and fit anywhere.
- Remote monitoring wanted without a monitoring contract attached to it.
What we built
A Telemetrix wastewater panel: industrial switchgear with no stepping relay to burn out, and remote monitoring over 4G, WiFi or Ethernet. Free email alerts for pump trip, high level and panel offline, texts at 10p each, and the optional Dashboard if the customer wants the history.
Delivery
Supplied from stock for the changeover.
The outcome
In the pump engineer's words: "Out with the old, in with the new, finish the week off with a Telemetrix by G&G Controls installation." The distributor has since been to Stoke-on-Trent to see the production line and work up a bespoke panel with us.
Got a similar job?
Send the spec, points list or drawing and we will tell you what we would build, the price and the date.
“The detail, and thought that goes into making these installer and end user friendly is second to none. The best control panels we've seen, let alone had the pleasure of using. Great products.”
- Wiring diagram, test certificate and 12-month warranty with every panel
- Built to BS EN 61439-2 and BS EN 60204-1 in Stoke-on-Trent
- We reply during working hours, usually the same working day
More case studies
Butlins Skegness
One motor control centre for 64 motors in a water park plant room
The pool and water park plant room at Butlins Skegness needed a new motor control centre to run every pump, blower and feature from one place, with a BMS interface for the integrator's controllers. We designed and built it in Stoke-on-Trent.
Read the case study
Confidential London project
Every BMS control panel for a prestigious London building, from one supplier
The full BMS control panel supply package for a high-profile London building: every outstation and motor control panel across its plant rooms, designed, built and tested in Stoke-on-Trent and delivered to the contractor's programme. The client and project cannot be named.
Read the case study
SSE Energy Solutions
A Form 2 outdoor BMS panel on the roof in 12 working days
SSE Energy Solutions were refitting the third floor of Highgate Mental Health Hospital in London: new walls, heating, HVAC, electrical and controls throughout, with a new BMS tying into the trust's existing Trend network. The panel for it had to sit on the roof, and the only crane was coming down in three weeks.
Read the case studyGot a project, or just need a quick answer?
Tell us what the panel has to do and we will come back with a price and a lead time. Existing accounts: reorders and spares go through the same form.