Skip to content
G&G Controls, The Panel People

Panels

Every panel we build

Three ranges: pump control panels, BMS control panels and OEM panels built to your design. Pick yours. Each panel page has the specification, the options, the price where it is fixed, the lead time and the datasheet.

Pump control panel in a GRP kiosk

Pump control panels

For pump companies, drainage contractors and station builders. Standard wastewater panels in stock for next working day delivery.

Front of a G&G BMS control panel

BMS control panels

For BMS integrators and controls contractors. Built from your points list, or the standard Evometrix range in 10 to 20 working days.

Container load of finished OEM control panels

OEM control panels

For equipment makers. One platform for your range, a fixed BOM and 5 to 200 panels a month, built the same way every time.

Show

Pump control panels

Wastewater, drainage, booster sets, sewage treatment and adoptable stations. Standard panels in stock.

Overview and prices →
Basix twin pump wastewater control panel with the door open, showing contactors, overloads and WAGO terminals

Wastewater control panel

Basix

The standard float-switch pump panel: industrial components, a lifetime warranty on the stepping relay, and next-day delivery from stock.

From £906 + VAT for a single pump DOL panel and £1,245 + VAT for a twin pump DOL panel.

Telemetrix wastewater pump control panel, black enclosure with lamps and switches

Wastewater control panel with remote monitoring

Telemetrix

Industrial switchgear plus cloud connectivity over 4G, WiFi or Ethernet. Email alerts free for life; texts 10p each.

£1,798 + VAT for the dual pump DOL panel (up to 18A) and £4,300 + VAT for star/delta (up to 41A).

Triple pump 1.5kW booster panel open: three Invertek drives, relays and MCBs on shelved rails, with its wiring diagram and drive manual

Booster set control panels

Booster set controls

One to six pumps held at a single pressure set point by pre-programmed inverters in the panel. Swap a drive without replacing the booster set.

Inverter panels with pressure control from £2,428 + VAT (single pump 0.75kW, 400V) and £3,946 + VAT (twin pump 0.75kW).

BMS control panels

Bespoke panels from your points list, plus the standardised Evometrix range for speed.

BMS control panel internals annotated: spare earth ways, disconnect terminals, panel light, laptop socket, surge protection and 25% spare space

Building management systems

BMS control panels

From a points list to a tested, documented panel. We build for BMS integrators every day and understand what site teams need.

Priced per panel from the points list.

Evometrix BMS control panel internals

Standardised BMS control panel

Evometrix

Pre-designed, pre-drawn and refined over many builds. Drawings in two working days, delivery in 10 to 20 working days, and half the programming time on site.

Fixed price per panel.

Evometrix Gateway panel, grey steel enclosure on a pallet

Controller-ready BMS gateway panel

Evometrix Gateway

One order, one panel, fully assembled and tested: 24V AC and DC supplies, surge protection, network switch, light and labelling.

£924 + VAT, including 24V AC and DC supplies, surge protection, network switch and panel light.

OEM control panels

Your panel, built the same way every time

If you make equipment that needs a control panel, we become your panel department. We design one standard platform for your range, fix the bill of materials and build it in Stoke-on-Trent at the volume you need.

  • One platform, few specials. A standard design with option blocks covers 80 to 90% of variants.
  • Fixed BOM and price. Consistent cost, simpler procurement and easy spares.
  • Engineering in house. Controls design, PLC and HMI programming, drawings and compliance.
  • Traceable production. Documented QA and a serial number on every panel.
G&G engineers building control panels on the factory floor in Stoke-on-Trent

Built for

  • Pump and booster set manufacturers
  • Water treatment and rainwater harvesting equipment makers
  • HVAC, chiller and packaged plant builders
  • Generator and fuel system manufacturers
  • Hire fleet and industrial equipment makers

OEM panels we build

Outdoor dual chiller changeover panel with the inner door showing chiller 1 and 2 run and fault lamps, the on/off and duty selector switches, the isolator and the over-temperature alarm stat

Chiller changeover

Twenty panels from one drawing set for a cooling hire fleet

Duty rotation and trip changeover for chillers sent out in pairs, held on the shelf in the customer's depots.

Compact G&G control panel with push buttons, lamps and emergency stop

Generator fuel transfer

Fuel transfer panels

Bulk tank to day tank, single or dual pump, two or three day tanks. Standard panels from £1,579 + VAT.

Twin-door outdoor process cooling control panel open on a pallet in the factory, showing the two Vacon drives, the PLC bank, filter fans and the door-mounted switches

Process cooling

A chiller, a cooler and four pumps from one panel

Designed, built and programmed for a cooling hire company, and run through a two-day witnessed test in our factory.

Got a project, or just need a quick answer?

Tell us what the panel has to do and we will come back with a price and a lead time. Existing accounts: reorders and spares go through the same form.