BMS
BMS control panels for integrators and controls contractors
BMS integrators need a panel builder who reads a points list the way they do, works to their specification without being told twice, and delivers on the date the site programme depends on. We build for building services engineers every day.
Who we work with
- BMS system integrators
- Mechanical and electrical contractors
- Controls specialists
- Consulting engineers
- Facilities management
From points list to drawing
Send the points list and we produce the wiring diagram for approval.
Your specification or ours
We build to the integrator's spec. Where none exists, our minimum specification is published.
Standard panels, predictable
Evometrix and Gateway panels are built on one platform, so the drawings, the price and the lead time are known before you order.
Documented and tested
Test certificate and drawings in the door pocket of every panel.
Panels for bms
Building management systems
BMS control panels
From a points list to a tested, documented panel. We build for BMS integrators every day and understand what site teams need.
Priced per panel from the points list.
Standardised BMS control panel
Evometrix
Pre-designed, pre-drawn and refined over many builds. Drawings in two working days, delivery in 10 to 20 working days, and half the programming time on site.
Fixed price per panel.
Controller-ready BMS gateway panel
Evometrix Gateway
One order, one panel, fully assembled and tested: 24V AC and DC supplies, surge protection, network switch, light and labelling.
£924 + VAT, including 24V AC and DC supplies, surge protection, network switch and panel light.
Booster set control panels
Booster set controls
One to six pumps held at a single pressure set point by pre-programmed inverters in the panel. Swap a drive without replacing the booster set.
Inverter panels with pressure control from £2,428 + VAT (single pump 0.75kW, 400V) and £3,946 + VAT (twin pump 0.75kW).
Generator fuel systems
Fuel transfer panels
Single and dual pump fuel transfer control from bulk tank to day tank, with level control, safety relay and optional touchscreen.
Single pump £1,579 + VAT; dual pump £2,350 + VAT.
Case studies
All case studies →
Butlins Skegness
One MCCP for 64 motors in a water park plant room
The pool and water park plant room at Butlins Skegness needed a new MCCP to run every pump, blower and feature from one place, with a BMS interface for the integrator's controllers. We designed and built it in Stoke-on-Trent.
Read the case study
Confidential London project
Every BMS control panel for a prestigious London building, from one supplier
The full BMS control panel supply package for a high-profile London building: every outstation and motor control panel across its plant rooms, designed, built and tested in Stoke-on-Trent and delivered to the contractor's programme. The client and project cannot be named.
Read the case study
SSE Energy Solutions
A Form 2 outdoor BMS panel on the roof in 12 working days
SSE Energy Solutions were refitting the third floor of Highgate Mental Health Hospital in London: new walls, heating, HVAC, electrical and controls throughout, with a new BMS tying into the trust's existing Trend network. The panel for it had to sit on the roof, and the only crane was coming down in three weeks.
Read the case studyReading for bms
All articles →How to write a BMS points list that gets an accurate quote
A points list is the one document that turns a BMS panel enquiry into a price and a drawing. What to put in it, what to leave out, and a template to start from.
31 July 2026 · 4 min read
What's inside a BMS outstation panel
Power supplies, surge protection, a network switch, the controller and the terminals: what each part of a BMS panel does, and why the bits around the controller matter as much as the controller.
7 August 2026 · 4 min read
Free-issue controllers: how it works and what we need from you
Sending your own Trend, Distech, ISMA or Tridium controllers to be fitted into a panel: what to send, when, how it is labelled and tested, and who is responsible for what.
14 August 2026 · 4 min read
Building Management Systems (BMS): what are they and how do they work
There are many different systems in modern buildings such as the heating, cooling, clean water, wastewater and many other elements that need monitoring to ensure they work, errors are fixed and excessive consumption is limited. This is done using a BMS system. What is a Building Management System
25 July 2025 · 10 min read
Cutting BMS panel build times by 50%
Our BMS clients have told us that two things are super important to them: getting a drawing very quickly and then getting the panel delivered to site fast.
7 February 2025 · 2 min read
Analogue vs. Digital Signals
In modern building services and control systems, you'll encounter two fundamental types of signals: analogue and digital.
27 February 2026 · 3 min read
Talk to us about a bms project
Send the spec, points list or drawing and we will come back with what we would build, a price and a lead time.
“Normally we'd expect a 6 to 8 week lead time on a panel build. In this case it was done in 12 working days, which is a testament to G&G Controls and SSE working together.”
- Wiring diagram, test certificate and 12-month warranty with every panel
- Built to BS EN 61439 and BS EN 60204-1 in Stoke-on-Trent
- We reply during working hours, usually the same working day
Got a project, or just need a quick answer?
Tell us what the panel has to do and we will come back with a price and a lead time. Existing accounts: reorders and spares go through the same form.