Skip to content
G&G Controls, The Panel People
Motor starting and protection

Capacitor Sizes

By Tristan Newton, Commercial Director · 20 September 2024 · 3 min read

Capacitor Sizes

What size capacitors does my pump need?

Do I need to install capacitors in the panel?

You're in the right place to find out. Capacitor sizes are one of the hardest pieces of information to find out from pump manufacturers! So we've put it into a table to help.

Flygt pumps:

Pump Model Rated kW FLC (A) Run Capacitor (RC) Start Capacitor (SC) Overload Range Panel Part No.
3045 0.75 4.2 14 N/A 50 70 36
1305 0.75 4.2 14 N/A 4.0-6.3 50 95 98
3045 0.75 4.2 14 50 50 70 37
3085 0.85 5.1 20 125 50 70 37
1310 1 6.6 50 80 50 71 13
1310 1.3 8.4 50 80 50 71 13
3069 1.3 8.4 50 80 50 70 38
3085 0.9 7.2 20 80
3057 1.5 8.7 40 125 50 70 38
3068 1.5 8.7 40 125 6.3-10.0 50 70 39
3068 1.3 8.3 40 125 50 95 88
3069 1.5 8.9 40 50 50 95 88
3085 1.5 9.4 35 200 50 70 40
1310 1.5 8.9 45 150 50 67 81
1310 1.7 20 45 150 50 67 81
3085 1.9 12 20 125 50 70 41
3085 1.9 12 20 140 10.0-16.0 50 95 99
1310 2.4 14 45 150 50 67 83

Lowara pumps:

Model Phase No of Pumps kW Part No. Capacitor Run Capacitor Start
1305 1 Single 0.75 FL06507036 14µF -
1310 1 Single 1 FL06507039 50µF 80µF
1310 1 Single 1.3 FL06507039 50µF 80µF
1310 1 Single 1.4 FL06506781 45µF 150µF
1310 1 Single 1.7 FL06506781 45µF 150µF
1310 1 Single 2.4 FL06506783 45µF 150µF
Model Phase No of Pumps kW Part No. Capacitor Run Capacitor Start
1305 1 Twin 0.75 FL06507048 14µF -
1310 1 Twin 1 FL06507051 50µF 80µF
1310 1 Twin 1.3 FL06507051 50µF 80µF
1310 1 Twin 1.4 FL06506782 45µF 150µF
1310 1 Twin 1.7 FL06506782 45µF 150µF
1310 1 Twin 2.4 FL06506784 45µF 150µF

You should check with the manufacture before installing capacitors for pumps, but hopefully this can act as a helpful guide.

Written by the engineers at G&G Controls, a UK control panel manufacturer in Stoke-on-Trent. For general guidance only; consult a qualified professional for advice on your own installation.

Up next

Inverters no longer break the bank!

There are many electric motor applications where an inverter (or variable speed drive/VSD) is better than fixed speed/direct on line, with price as the only drawback. Traditionally inverters have been too expensive for many uses, but as technology advances the price of inverters continues to fall w

Related panel

If this article is about a problem you have on site, this is the panel we would suggest.

A G&G twin pump wastewater control panel on site: power, high level and mute lamps, run and fault lamps for each pump, hand/off/auto switches and the door isolator

Pump control panels

Pump control panels

Panels for 1 to 6 pumps, direct-on-line to inverter, built in Stoke-on-Trent. Standard wastewater panels held in stock.

Standard wastewater panels from £906 + VAT (single pump DOL) and £1,245 + VAT (twin pump DOL).

Ask an engineer

A question about this article or a panel for your site. We reply during working hours.

Or call 01782 280577

What happens next. A price and lead time, usually the same working day. Stock panels ship next day. We reply during working hours, Monday to Friday, 7am to 4.30pm.

Your details go to our sales team by email and are used only to answer this enquiry. No mailing list, nothing shared. Privacy policy.

More on motor starting and protection

Why does my pump keep tripping? A diagnostic checklist

Why does my pump keep tripping? A diagnostic checklist

Overload, blockage, seal, cable or supply: a step-by-step way to find out why a pump trips, what each cause looks like at the panel, and what to do about it.

29 May 2026 · 5 min read

Why single phase motors need capacitors

Why single phase motors need capacitors

Let's start with a simple fact - three-phase motors are better than single-phase motors. More torque, no capacitors, fewer complications. But a huge proportion of real-world applications only have single-phase power available, and single-phase motors can't start on a live and neutral alone. That's w

24 April 2026 · 4 min read

How to run a 3 phase motor on a single phase supply

How to run a 3 phase motor on a single phase supply

If you've ever faced a situation where you've got single-phase power but need to run a three-phase motor—say, a pump in a remote water treatment site—you've likely looked at single-phase-in, three-phase-out inverters.

20 February 2026 · 5 min read

Latest from the knowledge hub

Standardising a control panel platform: how OEMs take cost and lead time out
Company and industry

Standardising a control panel platform: how OEMs take cost and lead time out

Equipment makers who order panels every month usually order too many variants. How to design one platform with option blocks, what it saves, and how to move a range across to it.

21 August 2026 · 4 min read

Free-issue controllers: how it works and what we need from you
BMS

Free-issue controllers: how it works and what we need from you

Sending your own Trend, Distech, ISMA or Tridium controllers to be fitted into a panel: what to send, when, how it is labelled and tested, and who is responsible for what.

14 August 2026 · 4 min read

What's inside a BMS outstation panel
BMS

What's inside a BMS outstation panel

Power supplies, surge protection, a network switch, the controller and the terminals: what each part of a BMS panel does, and why the bits around the controller matter as much as the controller.

7 August 2026 · 4 min read

All 66 articles →